Anysee E30 S2 plus diseqc problem

General support questions (e.g. question about device support problems or general application features/workings).

Anysee E30 S2 plus diseqc problem

Postby s757 » Fri May 20, 2016 2:53 pm

Hello! I have Anysee E30 s2 plus with win8.1 x64. I have problem whit diseqc whit 4 ports.Port 1 - Astra 23,5E , port 2 Astra 19,2E. Port 1 workt correctly but port 2 dont workt (quality 0). Device is Florian BDA (bdas.dev). I tried the bda.dev but after the restart smartdvb dont workt. With original Viewer from Anysee workt port1 and port 2 correctly. Help me please.
s757
 
Posts: 0
Joined: Mon May 16, 2016 5:20 pm

Re: Anysee E30 S2 plus diseqc problem

Postby SmartDVB » Fri May 20, 2016 7:46 pm

Hi if using bda.dev (only bda.dev has specific anysee code) please make sure that anysee is selected in the ddvice settings under tools.
SmartDVB
Site Admin
 
Posts: 616
Joined: Sun Feb 01, 2009 5:18 am

Re: Anysee E30 S2 plus diseqc problem

Postby s757 » Tue May 24, 2016 2:16 pm

Whit bda.dev (Florian) and after restart pc dont work port1 and port 2. L-80 Q-0. Only whit bdas.dev workt port1 correct, port 2 dont work.
s757
 
Posts: 0
Joined: Mon May 16, 2016 5:20 pm

Re: Anysee E30 S2 plus diseqc problem

Postby s757 » Fri May 05, 2017 7:26 pm

Hello! With newest SmartDVB - bda.dev (florian) dont work Anysee E30 S2 plus. Only with bdas.dev (BDA DVB-s/t/c ATSC device) work port1 (Disecq 1.0), port2 dont work :( .
s757
 
Posts: 0
Joined: Mon May 16, 2016 5:20 pm

Re: Anysee E30 S2 plus diseqc problem

Postby SmartDVB » Fri May 05, 2017 9:44 pm

Could you send me a bda.log after tune failures and I'll have a look at this at the earliest opportunity
SmartDVB
Site Admin
 
Posts: 616
Joined: Sun Feb 01, 2009 5:18 am

Re: Anysee E30 S2 plus diseqc problem

Postby SmartDVB » Sun May 07, 2017 7:36 pm

https://mega.nz/#!v9I00Yga!4R9dwsyEPWHw ... fRH0yOfYw8

Hi could you try above bda.dev for anysee diseqc and report back? There might have been some problems with bda.dev anysee diseqc handling, but i'm unable to verify this stuff since i don't have anysee devices to test with. So any feedback would be kindly appreciated..
SmartDVB
Site Admin
 
Posts: 616
Joined: Sun Feb 01, 2009 5:18 am


Return to Support

Who is online

Users browsing this forum: No registered users and 2 guests

cron