Diseq-C monoblock Mascom

[Primo]

WindowsXP 32 bit - TBS QBox-S2 USB - momoblock Mascom 19.2E and 23.5E. SmartDVB setting up diseq-C 19.2E committed LNB1, 23.5E committed LNB2,
switch function of satellites and receiving OK.
Windows7 64 bit the same settings accept only 19.2E does not switch on 23.5E. Drivers for TBS QBox S2 and Windows7 64bit.
Please advise where is the error?

[SmartDVB]

are you using the same version (32 or x64 build?) on the two systems? Perhaps there are some TBS diseqc bugs with the x64 build as i have seen similar reports. Are you using bda.dev? If so could you post or send me the bda.log after such failed diseqc switches.

[Primo]

bda.dev 202240 b
QBOXS2 vhid 1.0.3.0
S2QBOX 2.0.4.2
SmartDVB 0.2.5 RC1 I use both systems, SmartDVB 05050 the same result.
In annex I send logos and images.
With the best regards Primo

[Primo]

Solved thanks to SmartDVB
Tools - Device Settings - Select the TBS (the old bda.dev)
- Select the TBS (Old PCI) (the new bda.dev)
Switching diseq-C 19.2 E / 23.5 E OK